Shop by Category
Info
- This product is also found in:
- LED Dive Lights
Up to 2 business days to dispatch direct
The Hyperion 350 Dive Light is a great cray hunting or back up torch, punching out 350 Lumens of light which is more than twice that of similar more expensive models. When loaded with 4 x AA batteries (not included) the Hyperion FL350 will burn for 150 minutes (2.5 hours) and will accept rechargeable batteries as well.
The switch on the torch is a magnetic slide switch with 3 modes (High - Low - Strobe) and comes with a unique O-ring system to stop the torch from being activated in your bag or BCD pocket. The torch is depth rated to 50 metres and measures 42 mm (D) x 160 mm (L). Lastly, the torch comes with two mounting options, a traditional wrist lanyard as well as a wrist strap system that with a little creativity can be used to mount straight onto the side of a cray snare or speargun.
Hyperion FL-350 Dive Light Features
- Hand Held, Compact and Rugged Dive Light
- Great for Cray Bashing or as a Backup Light
- Designed to Use as Primary or Backup Dive Light
- Bright 350 Lumen LED Dive Torch
- Long Two and a Half Hour Burn Time
- High, Low and SOS Strobe Modes
- Powered by Four AA Batteries (not included)
- Simple to Use Magnetc Switch
- Versatilke Wrist Lanyard
Hyperion FL-350 Dive Light Specifications
- Three Modes: High, Low, Strobe
- Lumens: 350
- Depth: 50 metres
- Switch: Magnetic
- Batteries: 4 x AA Alkaline (not included)
- Run Time: approx. 150 minutes
- Size: 42 mm (D) x 160 mm (L)
- Warranty: 1 year
Instructions:
- Slide the switch to activate the light and cylcle through the power levels.
- Slide and hold the switch for 6 seconds to activate SOS Light Mode.
Maintenance and Care:
- The torch should be rinsed thorouly with fresh water after every use.
- Check the O-rings to make sure they are clean every time the tirch is opened.
- Remove any dirt/debris from the O-ring to ensure the torch does not leak.
- The O-rings should be checked periodically for cracks and damage, and replaced if damaged.
- Lubricate O-rings with silicone grease.
- Do not attempt to open or disassemble any part of this light. Disassemble will void warranty.
(12/20 LRB)