The Apeks WTX Harness is the most versatile one from Apeks and it features a range of customisation options. The sturdy construction combined with high-quality, rugged materials make this harness a foundation for many single and twin cylinder diving configurations. Divers who want to build their own BCD and backplate setup but don't want to go full DIR will want a harness system like this. The padding on the backplate and shoulder straps will be more comfortable if you're diving in warmer waters and wear thinner suits.

The Apeks WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the entire system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver. This harness is Apeks's most versatile yet featuring a range of customisation options. Can mount directly to a single cylinder using dual nylon cylinder bands or a single tank adaptor. Can accept a WTX Back Plate for heavy loads such as twin steel cylinders. Multiple grommet settings on the waistband allow the attachment of the SureLock weight system.

Open shoulder design allows diver to add or remove hardware for total customisation. Made from rugged 1050D Ballistic Nylon. Removable crotch strap made of 5 cm (2 inch) soft webbing. Six 5 cm (2 inch) stainless steel D-rings (2 x angled on shoulders, 2 on the hips, and 2 on the crotch strap) for accessory attachment. Two 2.54 cm (1 inch) stainless steel D-rings along the lower back are for marker buoys, reels or other accessories and six on the back pad. Removable back pad. Heavy-duty waist buckle made of stainless steel. Stainless steel tri-loaders distribute the load between the back, waist and shoulders for a great fit. SOLAS reflector airway hold-downs can be removed or repositioned. Chest strap comes standard. Includes two tank bands for single cylinder use. Harness is available in multiple sizes.

Apeks WTX Harness Features

• Unparalleled Versatility, Modular Nature of System
• Harness APEXS Most Versatile Featuring Range of Customisation Options
• Mount Directly to Single Cylinder Using Dual Nylon Cylinder Bands or Single Tank Adaptor
• Can Accept WTX Back Plate for Heavy Loads Such as Twin Steel Cylinders
• Multiple Grommet Settings On Waistband for SureLock Weight System
• Open Shoulder Design Allows Diver to Add or Remove Hardware
• Designed for Total Customisation
• Rugged 1050D Ballistic Nylon
• Removable Crotch Strap Made of 5 cm (2 inch) Soft Webbing
• Six 5 cm (2 inch) Stainless Steel D-Rings:
  Two Angled On Shoulders
  Two On Hips
  Two On Crotch Strap
• Two 2.54 cm (1 inch) Stainless Steel D-Rings:
  Along Lower Back For Marker Buoys, Reels or Other Accessories
• Six Stainless Steel D-Rings on Back Pad
• Removable Back Pad
• Heavy-Duty Waist Buckle Made of Stainless Steel
• Stainless Steel Tri-Loaders: Distribute Load between Back, Waist & Shoulders for Great Fit
• SOLAS Reflector Airway Hold-Downs
• Hold-Downs: Removeable/Repositionable
• Chest Strap Comes Standard
• Includes Two Tank Bands
• Available in Multiple Sizes

Apeks WTX Harness Size Guide

Use this guide to find the best size for your new Apeks WTX Harness. Please contact us if you require any further assistance or advice.

* Measured from centre of waistband front to centre of waistband back

Note: This item cannot be delivered outside of Australia.

(10/22 HS)