This product has been discontinued

The OMS Comfort Harness System II with Stainless Steel Backplate combines these two great OMS products completely assembled so you have more time to go diving! Simply add a wing/aircell of your choice and weight pockets (if needed) and you are ready to jump in the water. An accessory comfort pad is also available.

Harness: The OMS Comfort Harness System II is perfect for those who want a quality diving harness. The Comfort Harness System II is direct over the shoulder harness - the same padded shoulder strap configuration found on the OMS IQ Pac. The OMS Comfort Harness now incorporates a pull dump tunnel on each shoulder pad. Harness system with (4) chest mounted D-rings, (2) waist strap D-rings and a crotch strap O-ring all made from corrosion-resistant stainless steel. The waist strap is equipped with a latch style stainless steel buckle and the adjustable torso and chest (sternum) straps are equipped with squeeze-style side-release plastic buckles for easy donning and doffing.

Stainless Steel Back Plate: OMS's superior de-burring process eliminates backplate sharp edges and prevents abrasion and cuts to webbing and BC's. The Stainless Back Plate weighs only 2.6 kg (5.75 lbs) and includes the following slots: 2.54cm and 5.1cm (1" and 2") width crotch strap, (2) cam band, and a bottom slot to accommodate band bolts that are slightly off 27.94cm (11") on centre. Stainless steel plate is passivated to prevent oxidation and now incorporates additional slots to mount cam bands for single cylinder configuration. The plate has 22 holes for flexibility in accessory mounting.

Back Plate and Harness come with an owner's manual and are covered by a 12-month limited warranty.

OMS Comfort Harness System II with Stainless Steel Backplate Features

Stainless Steel Back Plate:
- Superior De-Burring Process
- Design: Eliminates Sharp Edges, Prevents Abrasion and Cuts to Webbing and BC's
- Corrosion Resistant Stainless Back Plate
- Weight: 2.6 kg (5.75 lbs)
- Plate Webbing Slots:
  2.54 cm and 5.1 cm (1" and 2")
  Cam Band
  Bottom Slot: Accommodate Band Bolts, Slightly Off 27.94 cm (11 inch) On Centre
  Slots to Mount Cam Bands for Single Cylinder Configuration
  Passivated to Prevent Oxidation
  22 Holes for Flexibility in Accessory Mounting
Harness: OMS Comfort Harness System II
- Quality Diving Harness
- Stainless Steel D-Rings: (4) Chest Mounted, (2) Waist Strap, Crotch Strap O-Ring
- Direct Over-the-Shoulder Harness
- Pull Dump Tunnel on Each Shoulder Pad
- Fully Padded Shoulder Straps
- Waist Strap: Stainless Steel Latch Style
- Sternum (chest) and Adjustable Torso Straps
- Torso/Sternum Straps: Equipped with Plastic Squeeze-Style Side-Release Buckle
12 Month Limited Warranty
Owner's Manual