Divesoft Analyser He/O2 Blender Basic Set was compiled mainly for divers and filling stations, which prepare Nitrox and Trimix and which want to have analyser stored in the watertight case. The Blender Basic Set includes a professional flow limiter, which we consider essential to getting the best gas mix readings.

The Divesoft Analyser He/O2 Blender Basic Set contents:

• Divesoft Analyzer He/O2
• Watertight case #8015
• Professional flow limiter #8021
• Connecting hose #8009
• Power adaptor #3026
• Spare O-rings #8019

The Scuba Doctor use and thoroughly recommends this analyser. It is by far the best on the market today. We use them day in and day out in our dive shop and totally punish them. They have never missed a beat.

The Divesoft Analyzer He/O2 is accurate and precision apparatus for measuring oxygen, nitrogen and helium concentration in diving breathing mixtures. It is a necessary assistant for technical divers who use Nitrox and Trimix mixtures.

The Divesoft He/O2 Analyser is characterized by high precision and reliability through innovative solutions of helium content measurement. This technology works on the principle of the speed of sound and is developed and patented by Divesoft. Because it is never a need to change the helium sensor, as is the case with other analyzers.

Another advantage of the Divesoft Analyzer He/O2 is the number of features and accessories. Analyzers have built-in calculator for mixing gases, it can be connected to the compressor to monitor oxygen concentration during continuous filling with warning alarms (can also be wired relay automatically turns off the compressor when critical values), and plug-in modules can measure voltage and resistance. This is especially useful for determining the state of charge of diving lamps and scooters respectively state bulbs / lamps.

The Divesoft Analyzer He/O2 can detect a faulty air if it is a hypoxic mixture with nitrogen and other inert gas is not present. This feature represents a major safety advantage over other analysers in the world market.

How It Works?
Standard electrochemical oxygen sensor is used for oxygen content measurement. The content of helium is measured by speed of sound. Each gas has different spread of sound because his density. The device generates sounds (knocking) and they go thru labyrinth and there are caught with sensitive microphone. The accuracy is +/- 1%.

How To Use?
The Divesoft He/O2 Analyzer has many sophisticated features, nevertheless control is easy and intuitive. Mount one of flow limiters on valve, switch the analyzer on and oxygen and helium content appears.

Properties:

• OLED display
• Durable aluminium body
• Plug-in connector
• USB connector

Divesoft Analyser He/O2 Blender Basic Set Features

• Instant MOD and END calculation for measured gas
• Faulty air attention
• Built-in mixing calculators
• Continuous mixing mode with alert and switching off relay possibility for high pressure compressors during continuous gas blending
• Gas purity mode for argon measurement
• Atmospheric pressure and temperature detection – recalibration after altitude and temperature change not necessary
• PC connectible – measured data recording
• Upgradable

Available Accessories

• Ohmmeter #8018
• Voltmeter #8017
• Measuring cables #8014

Download Divesoft Analyzer He/O2 User Manual

Drop Ship
This is not a regularly stocked item in our Rye dive shop. It will be ordered for you from the manufacturer upon request and typically shipped direct from them to you the same day thus resulting in no delay in delivery.

Tech Tip

Trust No One

Get an analyser. Learn how to use it properly. Calibrate it before every use. The only person who should be analysing your cylinders is you. The only analyser you should use is yours.

Label Everything

Clearly label anything that isn't air. If the MOD is less than the maximum possible depth of the dive (think deco cylinders), make sure the MOD stands out where not only you can see it, so can your buddies. Make it obvious to everyone if you are using the wrong cylinder at the wrong depth.

Consider putting a small piece of tape on each second stage, just in front of the mouthpiece, that has the MOD for the cylinder it is attached to. (This is in addition to the standard cylinder markings.) Any little thing that may save your life helps.

Special Order
We don't keep this item in stock however we would love to order it in from our supplier especially for you. This just means an additional 5-8 days for delivery. Please note that because we order the item specifically for you, we sadly can’t offer a return, so please choose carefully.

(09/22 AG)