The Apeks XTX50 Octopus Second Stage Regulator is the perfect redundant second stage for any of the Apeks primary regulators. Designed to meet demanding cold water standards, the Apeks XTX50 Octopus Regulator has a balanced valve for performance, an inlet heat exchanger, full metal valve barrel, venturi and inhalation controls to ensure performance and reliability even in extremely cold conditions.
The inlet heat exchanger and full metal valve barrel help to dissipate the cold generated as air decompresses between each stage, reducing the potential risk of ice crystals forming on critical components.
A venturi lever allows control of the airflow within the housing, directing it to either provide full performance and airflow or free-flowing protection by forcing air back towards the diaphragm. The inhalation adjuster allows the breathing effort required to open the valve to be increased from its optimal setting as required by the diver.
The Apeks XTX50 Octopus 2nd Stage Regulator is finished off with a high visibility yellow front cover and trim and is fitted with a standard length braided octopus hose. The braided hose offers improved UV protection over traditional rubber hoses and also significantly raises the burst pressure of the low-pressure hose.
Apeks XTX50 Octopus 2nd Stage Regulator Features
- Fully balanced valve mechanism
- Heat exchanger
- Venturi control
- Diver inhalation adjustment
- Anti-bacterial mouthpiece
- Braided yellow low pressure hose
Note: This item cannot be delivered outside of Australia.