Shop by Category

banner banner

AP Diving Buddy Twinset Backpack

BK1 5.5 | 7 | 8 TWIN
AP Diving
$169.00 $153.00
Save
9%



Qty:         

The AP Diving Twinset Back back combines the tried and proven AP Diving Twinset Cambands with a Backpack Moulding and Harness.

The AP Diving webbing cam band system has proven itself for over 30 years to be the superior system available in terms of ease of use, adjustability and cylinder security.

No Tools Required - Simple to change over from the single camband that comes as standard with AP (BUDDY) BCDs to a twinset camband upgrade. Adjust and fasten the camband entirely by hand.

No Need To Wet The Bands - Other brand systems require the bands to be wet before you tighten them because their webbing expands when wet and would therefore loosen during the dive. AP cambands are designed with non-hygroscopic webbing and can be adjusted and tightened completely dry with the confidence of superior cylinder grip throughout the dive.

No Cylinder Boot Or Manifold Required - The twin cylinders are held in place by the separation blocks and do not require either a twin cylinder boot or a manifold. It is the diver's choice whether they want to use a manifold, but the AP system offers the option of having a first stage on each cylinder. Held by bands at top and bottom, the twinset is held as rigidly in position as any metal-band/twinboot/manifold system.

This package consists of four special length BK3 type cam bands, one 4-slot anti-slip rubber plate, two special separation crimping blocks, a Backpack Moulding and Harness. Once correctly cammed using the special separation blocks, the twin cylinders are rigidly held in position.

It is advisable you measure your cylinders but typically:
5 and 7 litre cylinders = 5.5"/140mm diameter
10 litre and 12 litre cylinders = 7"/178mm diameter
12 litre dumpy and 15 litre cylinders = 8"/203mm diameter

Three sizes available:
BK1 5.5" Twin includes Backpack moulding and harness
BK1 7" Twin includes Backpack moulding and harness
BK1 8" Twin includes Backpack moulding and harness

There is a reasonable amount of leeway on the webbing band length to cater for cylinders with unusual diameters.

Stock Availability: A delivery delay could be experienced with this item if not in stock. Please contact us first to confirm stock availability before placing order if you have a tight or critical delivery time-frame.

(11/14 LRB)


The Scuba Doctor Australia
Boon Wurrung Country
1/49 Peninsula Ave
Rye Victoria 3941, Australia
Commonwealth Coat of Arms
We accept Purchase Orders from Government Departments & Schools
Contact
P +613 5985 1700
E diveshop@scubadoctor.com.au
-------------------------
Opening Hours
-------------------------
Shop by Category
-------------------------
Brands
Copyright © 2005-2024 by The Scuba Doctor Australia, ABN 88 116 755 170. All rights reserved. tel. +61 3 5985 1700 :: email. diveshop@scubadoctor.com.au :: Web site by it'sTechnical 2022