The Alpha High Pressure (HP) 7/16 inch Male to 7/16 inch Female UNF adaptor with wide bore (approx 4 mm diameter) is used is used as a spacer on high pressure ports. If you need a little more space at your first stage where the HP hose or a dive computer Air Pressure Transmitter attaches, then the 7/16" to 7/16" high pressure spacer can sometimes fit the bill.
Stand-off or spacer for a High Pressure 1st stage regulator port.
This adaptor can be used to solve an often seen problem with the remote pressure transmitter on air integrated dive computers. Screwing the transmitter directly in to a HP port can obstruct access to an adjacent port on some first stage designs. This adaptor can be used as a 'stand-off' or spacer, raising the transmitter away from the body of the first stage.
It is also used to fit a computer transducer with a 15 cm (6 inch) long high pressure hose to a high pressure port on your first stage regulator. This requires a high pressure swivel-pin/air-spool (WMD-P-2 | AHA-5S | HL303).
The 7/16"-20 UNF Male end of this spacer adaptor screws into a standard HP port on a first stage regulator. The male end has a wide bore (approx 4 mm diameter). Thus an air spool can be used with this HP adaptor.
The 7/16"-20 UNF Female end of this spacer adaptor accepts the 7/16"-20 UNF Male end of a standard HP hoses that normally screws into a standard HP port on a first stage regulator.
- Fits on standard 7/16" High Pressure Hoses
- Durable marine grade chromed brass construction
- Factory cleaned - Nitrox ready
(04/22 AJG)