Shop by Category
Miflex Xtreme LP Inflator Hoses
The Miflex Xtreme coloured hoses listed here are all Low Pressure (LP) BCD / Inflator / Jacket hoses. We offer premium quality, Italian made, double-braided Miflex Xtreme LP BCD/Inflator/Jacket hoses at world competitive, value for money prices.
The range of Miflex Xtreme Low Pressure (LP) BCD/Inflator/Jacket specialist scuba diving hoses is available in eight exciting colours, allowing divers to lead a more colourful life and personalise their equipment. The Miflex Xtreme Inflator hoses are available in a wide range of stock lengths, based on customer requests.
Choosing the Best Inflator Hose Length
Our most popular BCD/Inflator/Jacket hose lengths are 60 cm (24 inch) or 65 cm (26 inch) long. Some people prefer a shorter length of 56 cm (22 inch) for the shorter BC inflation assembly often found on back inflation wings.
Our most popular Dry Suit Inflator hose lengths are 81 cm (32 inch) and 90 cm (36 inch).
Hose length is measured in cm, from end to end of the hose, including the fittings and their threads.
The typical low-pressure BC inflator hose is a 3/8-inch UNF male at the end that screws into the first stage LP port, and at the other end is the Quick Disconnect BC female slide-lock Schrader valve fitting that accepts the standard BC inflator male QD post. The Miflex Xtreme inflator hoses use this setup, the most common design of inflator coupling used in scuba diving. If you require a different style of inflator fitting, please check our LP adaptor range.
BC integrated alternate air source — You can not use the standard BCD/inflator/jacket QD hose Schrader fitting to supply a BC integrated alternate air source, as the device would not receive enough gas due to the flow restriction of a standard Schrader fitting. However, it is possible to adapt a Miflex Regulator hose to the various integrated air source inflator posts used, but to avoid confusion we list the hose adapters separately.