Shop by Category
The OMS H-Valve Adapter Right (V804) is used to convert OMS, Dive Rite or compatible brand Modular Valves into an H-Valve system.
A H-valve is a special valve connected to a cylinder to allow two independent first-stage regulators to be connected, mimicking the redundancy of a double-cylinder configuration. It's a setup often used by recreational and solo divers to provide additional redundancy.
The H adapter evolved from the Y valve. Originally produced by Sherwood in the 80s, the dual outlet Y valve for yoke regulators allowed divers to do limited overhead penetration while still having two independent regulator systems for redundancy. The H adapter is the latest generation of dual-outlet single tank diving. The H adapter screws into the crossbar outlet of the K valve so a second regulator can be attached for technical diving. The H adapter is available in 200 bar only and equipped with ribbed rubber knobs that are rugged, yet easy to manipulate.
The OMS H-Valve Right is an Oxygen serviced valve suitable for use with up to 40% Oxygen. It can be O2 cleaned for use with 100% Oxygen.
OMS H-Valve Adapter Right Specifications
- Valve Thread: USA 3/4-inch 14NPSM
- First Stage Connection: DIN & Yoke
- Burst Disk Service Pressure: 240 bar (3,500 psi)
- Burst Disk Rupture Pressure: 400 bar (5,800 psi)
- Oxygen Compatible materials: Yes
- Max Valve Pressure Rating (DIN): 310 bar (4,500 psi)
(12/22 HS)