Shop by Category

banner banner

Sonar Scuba O-Ring - 112 Viton/FPM 75 Duro - Brown

SNR-ORING-112-V75
Sonar
$3.00

Qty:         

These Sonar Scuba O-rings are size BS1806/AS568-112, with a hardness durometer of 75, and made from FPM/FKM/Viton® Fluorocarbon Elastomers which are the preferred choice for oxygen and nitrox compatibility in SCUBA diving applications.

This is the O-ring size typically used at the front and back of the DIN insert used to convert standard DIN valves to INT/Yoke valves. These are the O-rings we prefer to use on the San-o-Sub DIN/K valves on Faber steel cylinders that are being used for Nitrox or Oxygen.

They are also the standard size DIN O-rings used on the male DIN fitting of many brands of first stage regulators that screws into and seals to the female DIN fitting on the cylinder valve.

V75-112 - O-ring Brown FPM 75 Duro BS112, 0.487 x 0.103"

BS112 O-Ring Size

BS1806- OD ID CS SCUBA Application Seal
112 11/16" 1/2"
0.500"
3/32"
0.103"
Standard DIN Regulator/Valve
(Nearly all DIN regulators)
Duro: FPM 75

Standard dimensions: CS 0.103" x ID 0.487"
Metric dimensions: CS 2.62 mm x ID 12.37 mm
Nominal fractional dimensions: CS 3/32" x ID 1/2"

FPM O-Ring Material

Fluorocarbon Elastomers (FPM/FKM/Viton®)
O-rings made of FPM/FKM/Viton® have been the preferred choice for oxygen and nitrox compatibility in SCUBA diving applications. FPM/FKM/Viton® is an elastomer with excellent oil and oxygen resistance at high and low temperatures, very good chemical resistance. Even for use with ordinary air, most experts agree that FPM/FKM/Viton® O-rings outperform common Nitrile O-rings.

The Difference between FPM, FKM and Viton®
The terms FPM, FKM and Viton® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber.

  • FPM is the international abbreviation according to DIN/ISO.
  • FKM is the short form for the fluoroelastomer category according to the American standard ASTM.
  • Viton® is the registered trade mark of DuPont Performance Elastomers.

Colour: Brown

(03/17 LRB)


The Scuba Doctor Dive Shop Logo
Connect with us on Facebook - scubadoctor  View our YouTube Channel - ScubaDoctorRye  Follow us on Instagram  View us on Pinterest - scubadoctor  Follow us on Twitter - @scubadoctor
The Scuba Doctor Australia
Boon Wurrung Country
1/49 Peninsula Ave
Rye Victoria 3941, Australia
Commonwealth Coat of Arms
We accept Purchase Orders from Government Departments & Schools
Contact
P +613 5985 1700
E diveshop@scubadoctor.com.au
-------------------------
Opening Hours
-------------------------
Shop by Category
-------------------------
Brands
Copyright © 2005-2024 by The Scuba Doctor Australia, ABN 88 116 755 170. All rights reserved. tel. +61 3 5985 1700 :: email. diveshop@scubadoctor.com.au :: Web site by it'sTechnical 2022