Miflex Hoses / Accessories show info...

Only a handful of companies have the technology to make double-braided polyester hoses, although these same hoses are sold under a variety of different names. The Scuba Doctor sells the Italian made, premium quality, Miflex brand.

The Miflex Carbon HD and Miflex Xtreme-hi + ranges of high pressure gauge hoses bring clear benefits when compared to traditional HP hoses to better suit the majority of divers requirements. Slim-line and Lightweight design, approximately 60% lighter than traditional HP hoses with a burst pressure in excess of 2,000 bar (29,000 psi).

Miflex Xtreme Low Pressure Regulator hoses and Miflex Xtreme LP BCD/Inflator hoses feature an external nylon safety braiding designed to resist the snags and abrasions that divers can often encounter. The patent-pending Miflex Xtreme double braiding also resists UV rays out of the water, thus extending the lifespan of the hose.

Unlike traditional hoses, the Miflex Xtreme nylon safety braiding is not simply pushed over the hose fittings. Instead the braiding is tightly bound and fixed to the hose core by stainless steel or brass sleeves.

Each Miflex Xtreme Low Pressure Regulator hose comes standard with 3/8" Male and standard UNF 9/16" Female connections. The Miflex Jacket/BCD/Inflator hose comes standard with 3/8" Male and quick release coupler fittings.

All Miflex hoses come in a Water Resistant Document Wallet, and are Oxygen Cleaned from the factory.

As a related business imports and distributes the Miflex range of diving hoses in Australia, we know these hoses better than anyone else in the region.

Tech Tip: Dive Hose Life

In our experience double-braided polyester diving hoses are more reliable than rubber hoses, but keep in mind that all SCUBA hoses, both rubber or polyester, will fail sooner or later either due to age, storage conditions or handling.

Do not allow hoses to receive prolonged exposure sunlight, as the heat and UV from strong sunlight will significantly shorten the life of the hose. Do not attempt to flush the inside of the hose with any form of solvent or other chemical. New hoses are factory clean and if you have any reason to think they are no longer clean then the hose should be replaced.

Prior to every dive trip you should always pressurise and inspect your hoses for mechanical damage, corroded fittings, bulges and leaks. For more information about the care and maintenance of your dive hoses, please see Caring For Scuba Diving Hoses.

The Scuba Doctor suggests replacing all SCUBA hoses every five years or 500 dives, whichever comes first.